- “Power Guard ECO-1825 10000mAh Mini DC UPS for Router” already exists in your wishlist
- “Power Guard ECO-1825 10000mAh Mini DC UPS for Router” already exists in your wishlist
-
R&M LCPC-SCPC OM3 Multi Mode Fiber Optic Patch Cord 1 Meter
R&M LCPC-SCPC OM3 Multi Mode Fiber Optic Patch Cord 1 Meter
The R&M LCPC-SCPC OM3 Multi Mode Fiber Optic Patch Cord 1 Meter comes with one LC-Duplex PC connector fitted on one side and an SC-Duplex PC Connector on the other side. It features LSZH material. LSZH stands for low-smoke zero-halogen and describes a cable jacket material that is non-halogenated and flame retardant. It is 1 meter in length. The R&M LCPC-SCPC OM3 Multi Mode Fiber Optic Patch Cord has no warranty.
350.00৳ -
R&M 24 Port Fiber Rack Mount LIU loaded with Singlemode 12x SC-PC DX Adapters
R&M 24 Port Fiber Rack Mount LIU loaded with Singlemode 12x SC-PC DX Adapters
The R&M 24 Port Fiber Rack Mount LIU is loaded with Singlemode 12x SC-PC DX Adapters & Splice trays. The Front panel with staggered arrangement of adapters. 19-inch housing has a Standard UL Listed IEC 60297-3: 19-inch (482.6 mm) rack. Adapter and connector in acc. with IEC 61754-15 and EN 186270. The Pigtails in ACC. is rated with color code DIN VDE 0888. The Protection class of these Rackmode IP 20 and the Number of connectors is 6 This Capacity (ports) 12 one height units. The splice Connector type (A) LC-Duplex The connector type is Lever- / frame-coding (A) Color The Sleeve material is ceramic and the adapter fastening method is end cap. The Conductor type used is semi-tight buffer dry. this 19 inch 1U Rack Mount Fiber LIU is Loaded duplex adapter (SM/MM) and the best part is its easily removable Top plate with push buttons. It is available in 6F/12F/24F/48F formations and LC-PC SM; SC-PC SM; LC-PC MM; SC-PC MM connector combinations depending on the model.
0.00৳ -
APC_AP7723, 16Amp ATS
If the primary source becomes unavailable, the Rack ATS will seamlessly source power from the secondary source without interrupting critical loads. Networked units have built-in network connectivity, which allows for remote management via Web, SNMP, or Telnet interfaces.
Product Type Automatic Transfer Switches Brand APC Country of Origin USA Rack Dimension Maximum Height : 44mm , 4.4CM ; Maximum Width : 432mm , 43.2CM ; Maximum Depth : 229mm ,22.9CM Capacity 16Amp Input Connection IEC-320 C20 Output Connection (1) IEC 320 C19 (Battery Backup), (8) IEC 320 C13 (Battery Backup) Input Voltage Nominal : 200V , 208V , 230V Output Voltage Nominal : 230V ; Total Current Draw : 16Amp Frequency 50/60 Hz Max Input Current 20A Body Color Black Temperature Operating Temperature : (-5 – 45 °C) ; Storage Temperature : (-25 – 65 °C) Relative Humidity Operating Relative Humidity : 5 – 95 % ; Storage Relative Humidity : 5 – 95 % Certification RoHS Approvals cUL Listed, CE, EN 55022 Class A, FCC Part 15 Class A, UL Listed Feature 01 Local Current Monitoring Display Feature 02 Rack-Mountable Feature 03 Transfer time <10ms Feature 04 Dual Input Power Sources Feature 05 Color LCD display Feature 06 10 kAIC Overcurrent Protection Feature 07 Information Displays Feature 08 Information Displays : Indicates the status of the AC sources powering the units, as well as indicates which source is set as the primary source and which source is currently supplying power to the load. This provides a visual depiction of the power flow Weight 3.93KG Warranty 1 year 0.00৳ -
APC Horizontal Cable Organizer 1U w/brush strip
APC Horizontal Cable Organizer 1U w/brush strip
Product Type Brush Strip Brand APC Feature 01 Promotes proper airflow while allowing cables to be passed from the front to the rear of the rack. Feature 02 Number of rack unit : 1U 0.00৳ -
APC AR3300 Rack
Deep Universal IT Enclosure for low to medium density server and networking applications that either require additional equipment clearance space or more open space for ease of access in the rear of the enclosure. Compact width to optimize data center space. 42U height to easily roll through doorways.
Product Type Server Rack Brand APC Shipping Dimension (HxWxD) 2118.0×752.0x1334.0mm Rack Dimension Rack Height : 42 U Capacity 3000 lb / 1363.6 kg (Stationary) 2250 lb / 1022.7 kg (Dynamic) Certification REACH, RoHS, UL, as per Manufacturer Approvals UL 2416 , UL 60950-1 Mounting Adjustable Mounting Rails Feature 01 Units per Pallet : 1.0 Feature 02 Vertical Posts : 16 gauge , Front Door : 16 gauge , Rear Door : 18 gauge , Roof : 18 gauge ; EIA Mounting Rails : 14 gauge , Side Panels : 18 gauge Feature 03 Front and Rear Locking Doors Weight 2250 to 3000 lb 0.00৳ -
APC Rack PDU 2G, Switched, ZeroU, 32A, 230V, (21) C13 (3) C19
Product Type Power Distribution Unit Brand APC Country of Origin USA Rack Dimension HxWxD : 1829mm, 182.9CM; 56mm, 5.6CM; 46mm, 4.6CM Capacity 32Amp Input Connection IEC 309 32A 2P+E Output Connection (3) IEC 320 C19 (Battery Backup), (21) IEC 320 C13 (Battery Backup) Input Voltage Nominal: 200V , 208V , 230V; Acceptable: 220-240VAC Frequency Input: 50/60 Hz Power Cable Length 3.05 meters; Power Cord: 1 Body Color Black Temperature Operating: -5 – 45 °C; Storage: -25 – 65 °C Relative Humidity 5 – 95 % Certification RoHS: Compliant; REACH: Contains No SVHCs; Battery Directive: Compliant; Battery Notes: “ts_Battery_Notes” Approvals EN 55022 Class A, EN 55024, EN 61000-3-2, EN 61000-3-3, VDE Feature 01 Overload Protection Feature 02 Alarm Thresholds: Define alarm thresholds in order to avoid overloaded circuits. Network and visual alarms inform the user of possible problems. Feature 03 Local Current Monitoring Display: The aggregate current draw per power distribution unit is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. Feature 04 Remote Management Capabilities: Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Feature 05 Power Delays: Allows users to configure the sequence in which power is turned on or off for each outlet. This helps avoid in-rushes at start-up, which can cause overloaded circuits and dropped loads. Sequencing also allows users to predetermine which piece of equipment is turned on first so other equipment dependant on that unit will function properly. Feature 06 Remote Individual Outlet Control: Remotely manage outlets so users can turn outlets off that are not in use prevent overloads) or recycle power to locked-up equipment (minimize costly downtime and avoid travel time to equipment). Feature 07 Rack-Mountable: Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most-in the racks near the equipment. Feature 08 Wide range of input and output connections: Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip. Weight 7.59 KG Warranty 1 Year 0.00৳ -
APC Rack PDU 2G, Metered, ZeroU, 32A, 230V
The American Power Conversion Basic Rack PDU distributes power to devices in the rack. The Rack PDU has twenty IEC-320-C13 outlets, and four IEC-320-C19 outlets. Power cord. The 10-foot (3.05-meter) power cord terminates with IEC-309 32 A connector.
Product Type Power Distribution Unit Brand APC Country of Origin USA Rack Dimension HxWxD : 1791mm, 179.1CM; 56mm, 5.6CM; 44mm, 4.4CM Capacity 32 Amp Output Connection (4) IEC 320 C19 (Battery Backup), (20) IEC 320 C13 (Battery Backup) Input Voltage Nominal : 200V , 208V , 230V; Acceptable: 220-240VAC Output Voltage Nominal: 230 V Frequency Input: 50/60 Hz Power Cable Length 3 meters; power Cords: 1 Body Color Black Temperature Operating : -5 – 45 °C; Storage:-25 – 65 °C Relative Humidity 5-95% Certification RoHS: Compliant; REACH REACH: Contains No SVHCs; Battery Directive: Compliant; Battery Notes:”ts_Battery_Notes” Approvals IEC 60950, VDE Mounting Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most – in the racks near the equipment. Feature 01 Flash Upgradeable: “Quickly and easily upgrade firmware via network download for future product enhancements. Eliminates the need to replace products already installed in the field when new features are released. (Note: Networked units only)” Feature 02 Local Current Monitoring Display: The aggregate current draw per rack PDU is displayed on the unit via a digital display. The local digital display helps installers avoid overloaded circuits by providing a visible warning when the current draw is close to the maximum amperage draw of the strip. (Available on designated SKUs only) Feature 03 Remote Management Capabilities: Full-featured network management interfaces that provide standards-based management via Web, SNMP, and Telnet. Allows users to access, configure, and manage units from remote locations to save valuable time. Associated with this feature is the ability to quickly and easily upgrade the firmware via network download to installed units for future product enhancements. Feature 04 Integrates with StruxureWare Data Center Expert:”An IT-ready, scalable access monitoring system that collects, organizes, and distributes critical alerts, surveillance video and key information, providing a unified view of complex physical infrastructure Feature 05 Agility: Allows additional run time to be quickly added as needed. Feature 06 Wide range of input and output connections: Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip. Feature 07 Load indicator LED:”Indicates overload and warning conditions based on the user-defined alarm thresholds. Alerts users of potential overloaded circuits.” Feature 08 Single input power source: Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections. Weight 6.93 KG Warranty 1 Year 0.00৳ -
APC Rack PDU, Basic, Zero U, 32A, 230V, (20)C13 & (4)C19
The American Power Conversion Basic Rack PDU distributes power to devices in the rack. The Rack PDU has twenty IEC-320-C13 outlets, and four IEC-320-C19 outlets. The 10-foot (3.05-meter) power cord terminates with a IEC-309 32 A connector.
Product Type Power Distribution Unit Brand APC Country of Origin USA Rack Dimension HxWxD: 1619mm, 161.9CM; 56mm, 5.6CM; 44mm, 4.4CM Capacity 32Amp Input Connection IEC 309 32A 2P+E Output Connection (4) IEC 320 C19 (Battery Backup), (20) IEC 320 C13 (Battery Backup) Input Voltage Nominal: 200V , 208V , 230V Output Voltage Nominal: 230V Frequency Input: 47-63 Hz Power Cable Length 3.05 meters; Power Cords: 1 Load Capacity 7360 VA Body Color Black Temperature Operating:0 – 95 %; Storage:-25 – 65 °C Relative Humidity Operating & Storgae :0-95 %; Certification RoHS: Compliant; REACH: Contains No SVHCs; Other Environmental Compliance: China RoHS Approvals CE, VDE Feature 01 Resettable circuit breakers: Enables a quick recovery from overload events. Feature 02 Toolless Rack Mounting Capabilities: Server cases do not require additional tools to mount into NetShelter Enclosures, which allows the users to quickly and easily mount units in the rear of the enclosure.” Feature 03 Vertical Mounting Capabilities: Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a NetShelter enclosures. Feature 04 Low Cost Power Distribution: Provides a number of outlets to bring power to rack equipment at an affordable price. Feature 05 Agility: Allows additional run time to be quickly added as needed. Feature 06 Wide range of input and output connections: Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip. Weight 5.57 KG Warranty 1 Year 0.00৳ -
APC Rack PDU,Basic,ZeroU,16A,230V,(20)C13 & (4)C19; IEC309
Product Type Power Distribution Unit Brand APC Country of Origin USA Rack Dimension HxWxD : 1619mm, 161.9CM X 56mm, 5.6CM; 44mm, 4.4CM Capacity 32 AMP Input Connection IEC 309 32A 2P+E Output Connection (4) IEC 320 C19 (Battery Backup), (20) IEC 320 C13 (Battery Backup) Input Voltage 200V , 208V , 230V Output Voltage 230 V Frequency Input: 47-63 Hz Power Cable Length 3.05 meters; Power Cord: 1 Load Capacity 7360 VA Max Input Current 32 A Body Color Black Temperature Operating Temperature: 0-45 °C; Operating Elevation: 0-3000meters; Storage Temperature: (-25-65 °C) Relative Humidity 0 – 95 % Certification RoHS: Compliant; REACH: Contains No SVHCs; Other Environmental Compliance: China RoHS Approvals CE, VDE Feature 01 Resettable circuit breakers: Enables a quick recovery from overload events. Feature 02 Toolless Rack Mounting Capabilities: Server cases do not require additional tools to mount into NetShelter Enclosures, which allows the users to quickly and easily mount units of the enclosure. Feature 03 Vertical Mounting Capabilities: Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a NetShelter enclosures. Feature 04 Low Cost Power Distribution: Provides a number of outlets to bring power to rack equipment at an affordable price. Feature 05 Agility: Allows additional run time to be quickly added as needed Feature 06 Wide range of input and output connections: Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip. Weight 5.57 KG Warranty 1 year 0.00৳ -
APC Rack PDU, Basic, Zero U, 10A,230V, (15)C13
The APC by Schneider Electric Rack Power Distribution Unit (PDU) distributes power to devices in the rack. The PDU has fifteen (15) IEC-320-C13 outlets. The 6.5-foot (1.98-meter) power cord terminates with a IEC-320-C14 plug.
Product Type Power Distribution Unit Brand APC Country of Origin USA Rack Dimension HxWxD : 610m , 61.0CM; 44mm, 4.4CM; 44mm, 4.4CM Capacity 10 Amp Input Connection IEC-320 C14 Output Connection (15) IEC 320 C13 (Battery Backup) Input Voltage Nominal: 120V , 200V , 208V , 230V , 240V; Acceptable: 100-240 VAC Output Voltage Nominal: 208V, 230V Frequency Input: 50/60 Hz Power Cable Length 1.98 meters; Power Cord : 01 Load Capacity 2300VA Body Color Black Temperature Operating: 0-45 °C, Storage Temperature:-25 – 65 °C Relative Humidity 0-95 % Approvals cUL Listed, CE, GOST, Queensland Australia, UL Listed, VDE Feature 01 Toolless Rack Mounting Capabilities: Server cases do not require additional tools to mount into NetShelter Enclosures, which allows the users to quickly and easily mount units in the rear of the enclosure.” Feature 02 Vertical Mounting Capabilities: Easily mounts vertically in racks or enclosures and occupies zero U of valuable rack space, which allows more equipment in the rack. Units that mount vertically are optimized to fit in a NetShelter enclosures. Feature 03 Low Cost Power Distribution: Provides a number of outlets to bring power to rack equipment at an affordable price. Feature 04 Agility: Allows additional run time to be quickly added as needed. Feature 05 Wide range of input and output connections: Product family includes a variety of input and output connections to distribute 120V, 208V, or 230V power to multiple outlets. Having a variety of inputs and outputs allow users to adapt to varying power requirements. APC offers units that bring up to 14.4kW using a single branch whip. Feature 06 Rack-Mountable: Includes horizontal, vertical, and toolless-mount varieties. Puts power where it is needed most-in the racks near the equipment. Feature 07 Single input power source: Supply power from one branch whip to multiple pieces of equipment, conveniently powering rack-mount equipment. Saves time and money during installation by using one branch whip and standard connections. Weight 2.0 KG Warranty 1 Year 0.00৳
